|
Quality Norwalk Burial Vault molds offer standard or custom design
to fit your individual needs. They are durable, trouble free, heavy
steel molds providing fast and easy stripping which speeds up cycle
time, increasing efficiency and assuring product quality and greater
profit margin.
|
|
|
Type I
|
Type II
|
|
Combines the pressure of grave load
with sealant for positive automatic protection.
|
|
|
|
| Note the durable heavy
duty steel construction of the Norwalk Automatic
Topseal Vault mold which will provide years of trouble
free casting. |
|
| Observe the ease with
which one man is able to strip the Norwalk Topseal
body mold. |
|
|
|
 |
|
Type II
Deluxe Cover Mold
|
Add optional legs and air release
to cover molds to facilitate stripping.
|
|
|
|
|
Need lined vaults? Norwalk manufactures
mold equipment designed to cast Plastic Liners into
Norwalk Topseal Burial Vaults. These same molds may
also be used to cast unlined vaults.
|
|
 |
|
|
Note the completely
finished core of the Norwalk mold used with the Plastic
Liner. This enables the mold to cast an unlined vault
when used with the optional Tongue and Groove Joint Forming
Material. |
| |
|
|
Equipped with air release to speed
stripping time and increase production. Available in
three dome and base styles providing an attractive price
spread.
|
|
AVAILABLE DOME STYLES
|
Standard
|
Deluxe Type I
|
Deluxe Type II
|
|
|
| Photo below illustrates
a Deluxe Type II airseal dome mold with standard
mold features. The mold core is shown in the strip
position. |
|
| Photo above shows
standard dome airseal mold with optional end release.
This feature is necessary, at additional cost,
anytime a pick up device interferes with normal
stripping of the mold outer shell. |
|
|
|
Inverted Pour Base Mold
|
Typical Airseal Base Mold
|
Upright Pour Base Mold
|
|
Internal Base Mold also available.
|
|
|
The concrete box or grave liner is
designed to replace the non-permanent wooden boxes previously
used to inter human remains. It is functional, preventing
sunken graves, yet inexpensive. It is the other alternative
for those looking for economy at the time of burial.
|
|
|
|
|
|
|
|
|
|
Oversize topseal vault with Deluxe
Type II cover.
|
|
|
|
|
|
Double Depth
|
Single Depth
|
|
|
|
|
When grave space is limited, suggest Norwalk double
crypts as an economical means of maximizing land utilization.
Norwalk molds for manufacturing double crypts are available
in 3-piece or 4-piece sets and offer a choice of two
different cover molds to match. Also included in the
set is a mold for casting crypt divider slabs. In addition,
provisions can be made for drainage or ventilation openings.
|
|
|
|
|
|
Photo illustrates 3-piece double crypt
mold with Deluxe Type I cover.
|
|
|
|
|
Photo illustrates 4-piece doublecrypt
mold with Type I cover.
|
|
|
|
|
|
|
Available in 11 standard sizes or
built to your specifications.
|
|
|
If you don’t see the Vault Mold that you need
in this brochure, please submit your specifications
to Norwalk for a mold quotation. Norwalk is an expert
in the art of custom Vault Mold fabrication.
|
|
|
|
|
|
|
|
HANDLE BENDER
Used for forming lifting hooks for vault covers or double
crypt divider slabs.
|
VAULT TURNING AND LIFTING DEVICE
Use with Hydra-Strip™ molds.
|
|
|
|
|
VAULT MOLD TURNING BAR
Required for turning outside mold shell. Vault is cast
inverted.
|
VAULT PICK-UP BAR
Used to handle and set concrete vaults.
|
|
|
Norwalk’s HYDRA-STRIP™ Burial Vault Molds
offer the very latest in automated vault production.
Each mold incorporates the best of Norwalk’s many
years of knowledge and experience as a manufacturer
of the mold equipment for the precast industry.
|
|
AUTOMATIC TOPSEAL
MOLDS - CONCRETE BOX MOLDS
|
|
|
|
|
More Rugged Construction
|
Easier Operation
|
|
|
DOUBLE DEPTH CRYPT MOLDS
|
|
|
|
|
Four Piece Double Depth
Crypt Mold
|
Three Piece Double Depth
Crypt Mold
|
|
|
|
Ring Mold Four Piece Double
Crypt
|
|
|
|
|
The following series of photos serve to illustrate
the manner in which a typical mold is stripped.
|
|
|
|
|
Attach the hydraulic pump to mold.
Unlatch a corner locking device and lower mold sides.
|
Activate hydraulic pump to eject vault
from mold.
|
|
|
|
|
Position turning device over vault
and clamp in place.
|
Using turning device, remove vault
from mold and turn over. Lower vault to floor and remove
device.
|
|
ELAPSED STRIPPING TIME - ABOUT
5 MINUTES!
|
|
|
Why buy mausoleum crypt sections when you can make
your own? Norwalk patented HYDRA-STRIP™ mold design
is a standard feature on mausoleum crypt molds and offer
a fast, easy, economical way to produce crypt sections.
|
|
Photo shows all mold equipment necessary
to manufacture mausoleum crypt sections.
|
|
|
|
|
|
|
|
|
|
|
Double wide mausoleum crypt section
with mold and crypt lifting device.
|
|
|
Do you have small or unused sections of your mausoleum
buildings or in your cemetery grounds that cannot be
used for full size burial? Columbarium molds offer flexibility
of design and ease of operation in the production of
Columbarium units.
|
|
|
|
|
|
Blockouts to shorten width.
|
|
|
